ProCure®

Internal curing for modern concrete

Engineer the Concrete. Engineer the Cure.

HydroMax® is an engineered, SAP-based internal curing admixture that absorbs and releases water within concrete to support continued cement hydration. By making curing water available as internal moisture is consumed, HydroMax® helps reduce self-desiccation, autogenous shrinkage, and the potential for early-age cracking.

Illustration of a HydroMax-branded mixer truck at a ready-mix plant
Over 35 million SFof concrete placed with HydroMax®

What’s the best way to cure concrete?

Continuous wet curing has long been recognized as one of the most effective ways to cure concrete. In conventional mixes, keeping the surface wet does two things: it limits moisture loss and supplies water that can move into the concrete through connected pores. But in today’s dense, low-w/cm mixes, those pathways can close off early.

As the cement hydrates and uses up available water, the relative humidity inside the concrete can drop even while the surface stays wet. That’s called self-desiccation. It can cause all sorts of problems like autogenous shrinkage and early-age cracking. Wet curing still protects the surface, but deeper in the slab, its advantage over methods that limit evaporation can diminish.

That’s where internal curing makes a difference. It doesn’t just keep water from leaving. It holds additional curing water in reserve throughout the mix and releases it into the surrounding paste as hydration continues after set. So the answer is; internal curing partnered with a good surface cure is the best cure there is.

That’s why we say: Engineer the Concrete. Engineer the Cure

Mix design assistance

Incorporate internal curing into your concrete mixes

ProCure can help you choose the right HydroMax® product and work through dosage, water adjustments, and batching for your materials and application. Contact us for mix design assistance.