ProCure®

HydroMax® internal curing admixture

HydroMax® PC

Pervious concrete

HydroMax® PC is an engineered, SAP-based internal curing admixture designed for pervious concrete. It absorbs and releases water within the thin cement paste coatings that bond aggregate particles, supporting continued hydration during the critical early curing period. This helps improve paste development and aggregate bonding and reduce the potential for premature deterioration.

Product details

Illustration of a parking lot with textured pervious concrete pavement

Applications

  • Pervious concrete pavements
  • Parking lots and low-volume roadways
  • Sidewalks, walkways, and recreational trails
  • Stormwater management applications
  • Commercial and residential pervious concrete
  • Fiber-reinforced pervious concrete
  • Pervious concrete containing supplementary cementitious materials (SCMs)

Advantages

Depending on mixture proportions, materials, placement, consolidation, and surface curing, HydroMax® PC may help:

  • Support continued cement hydration and strengthen the bonds between aggregate particles
  • Improve paste and strength development
  • Reduce the potential for early-age shrinkage cracking
  • Improve resistance to surface raveling
  • Improve durability and long-term performance

HydroMax® PC provides internal curing. It does not replace surface curing.

Dosage and batching

0.095%–0.125% by weight of total cementitious materials. Confirm the dosage in trial batches using the proposed materials or consult ProCure. Support any dosage outside the recommended range with testing.

4.5 lb bags

After loading all other materials, bring the concrete to the top of the drum. At the slump rack, add HydroMax® PC directly onto the fresh concrete. Rinse the drum normally and mix for 5 minutes before discharge.

Water management

Account for aggregate moisture when determining batch water. Maintain the established mixture proportions and avoid unapproved water additions at the jobsite.

Verify batching sequence, mixing time, and uniform distribution through plant trials.

Compatibility, void content, and infiltration

Other admixtures

HydroMax® PC contains no calcium chloride or other chloride-based ingredients. It can be used with other non-chloride admixtures. Dispense each admixture separately into the mix.

Void content and infiltration

Pervious concrete relies on interconnected voids to let water through. Select the mixture proportions, paste content, aggregate, and consolidation method to meet project requirements for density, void content, strength, and infiltration. Verify performance through trial batches and appropriate pervious concrete testing.

Specifications and handling

Standards and typical properties

Standard
Meets ASTM C494/C494M Type S
Appearance
White to cream, dustless powder
pH in water
10.5–12.7
Bulk density
0.7 g/mL

For Type S testing, the reference and test mixtures were adjusted to equivalent air contents.

Packaging and storage

Packaging
4.5 lb (2 kg) bags
Storage
41°F–95°F (5°C–35°C) in unopened original containers. Protect from direct sunlight and freezing.
Shelf life
At least one year

Typical specification clause

“Pervious concrete shall be internally cured with HydroMax® PC Internal Curing Admixture manufactured by ProCure. Material shall be used in strict accordance with manufacturer’s instructions.”

Rev. 10/26. See the full sheet for warranty terms.

Technical support

Mix design assistance for HydroMax® PC

Contact ProCure for help incorporating internal curing into pervious concrete. We can review aggregate moisture, paste content, and water adjustments alongside your target density, void content, and infiltration.