4.5 lb bags
After loading all other materials, bring the concrete to the top of the drum. At the slump rack, add HydroMax® PC directly onto the fresh concrete. Rinse the drum normally and mix for 5 minutes before discharge.
HydroMax® internal curing admixture
Pervious concrete
HydroMax® PC is an engineered, SAP-based internal curing admixture designed for pervious concrete. It absorbs and releases water within the thin cement paste coatings that bond aggregate particles, supporting continued hydration during the critical early curing period. This helps improve paste development and aggregate bonding and reduce the potential for premature deterioration.

Depending on mixture proportions, materials, placement, consolidation, and surface curing, HydroMax® PC may help:
HydroMax® PC provides internal curing. It does not replace surface curing.
0.095%–0.125% by weight of total cementitious materials. Confirm the dosage in trial batches using the proposed materials or consult ProCure. Support any dosage outside the recommended range with testing.
After loading all other materials, bring the concrete to the top of the drum. At the slump rack, add HydroMax® PC directly onto the fresh concrete. Rinse the drum normally and mix for 5 minutes before discharge.
Account for aggregate moisture when determining batch water. Maintain the established mixture proportions and avoid unapproved water additions at the jobsite.
Verify batching sequence, mixing time, and uniform distribution through plant trials.
HydroMax® PC contains no calcium chloride or other chloride-based ingredients. It can be used with other non-chloride admixtures. Dispense each admixture separately into the mix.
Pervious concrete relies on interconnected voids to let water through. Select the mixture proportions, paste content, aggregate, and consolidation method to meet project requirements for density, void content, strength, and infiltration. Verify performance through trial batches and appropriate pervious concrete testing.
For Type S testing, the reference and test mixtures were adjusted to equivalent air contents.
“Pervious concrete shall be internally cured with HydroMax® PC Internal Curing Admixture manufactured by ProCure. Material shall be used in strict accordance with manufacturer’s instructions.”
Rev. 10/26. See the full sheet for warranty terms.
Technical support
Contact ProCure for help incorporating internal curing into pervious concrete. We can review aggregate moisture, paste content, and water adjustments alongside your target density, void content, and infiltration.